Page 1 - INCOLA EXCLUSIVE DATA SHEET

Product Specification of VESBO INCOLA Exclusive Sound Level : Result of the test reports (P-BA 142/2022e) made by
Fraunhofer Institute for Building Physics IBP on 2nd
PP Multilayer Soundproof Piping System – Soil and August,2022.
Waste Discharge
Structure-borne sound level: 12 Lsc, A [dB(A)] at 4 l/s
Definition (Accordance with EN 14366)

Connection : with spigot ends and elastomeric rings
Water flow in drainage pipes can generate disturbing noises. In the past,
noise prevention or reduction was achieved mainly by insulating pipes or Non-combustibility : DS3d2 (EN 13501+A1), B2 (DIN 4102)
walls. This invariably incurred additional costs due to materials and labor
for installation, and precious time.

VESBO, a global brand name and innovator of smart piping solutions, Fire Growth Rate : Average FIGRA value (W/S): 627
presents INCOLA Exclusive – a commercially and technically viable
solution for home owners and installers.
Compatibility : Suitable for all waste water systems. No need the
Material : PP Compound consisting of: passage parts.

 Pipes
- Inner and outer layers: Polypropylene (PP) Standard : TSEK 169, DIN 4109, EN 13501-1+A1, DIN 4102
- Middle layer: “Incolene”- Polypropylene (PP)
reinforced with minerals External Audits : ISO 9001, ISO 45001, ISO 14001
 Fittings
- Injection-molded from Polypropylene (PP) Registrations : TGM-AUSTRIA, Fraunhofer-GERMANY, TSE and
incorporating “Incolene”- Polypropylene TSEK-TURKEY
(PP) reinforced with minerals
* In Alphabetical Order by Country Names
Density at 23°C : Pipes are 1.7 g/cm³ and fittings are 1.6 g/cm³
Installation, Tests : National or local requirements and codes of practice
Measuring Range : DN50, DN75, DN110, DN125, DN160, DN200 apply for installation of pipes and fittings. In addition,
the manufacturer may provide recommended
Melt Flow Rate : Max.: 3 g/10 min. (SUITABLE) installation guidelines

Pipe Type : Three layered pipe
Pipe Dimension DN /OD (mm) Thickness (mm)
 Inner layer: Abrasion resistant PP 50 4.0
4.5
75
 Middle layer: Sound absorbing Incolene material 110 5.3
 Outer layer: Impact resistant PP 125 5.3
160 5.3
Application Area : Indoor and outdoor (SN4 ~ SN12) 200 6.2

Usage Area : It can be used in sewage installations except for all
oily waste pipes and pressurized waste water pipes System Design

Usage Area : It is an ideal system for water with pH 2-12 Since the connecting ends of the pipes and fittings are resistant to a
maximum of 0.5 bar of internal hydrostatic pressure, they are used in lines
: Temperatures of up 95°C (long-term) and 110°C with no pressure. It takes up to 80°C in continuous usage and up to 95°C
(short-term) in short usage. It should not be used to carry wastes that contain petroleum
based solvents, ketones and acetates. It is an ideal system to transport
Chem.Resistance : Raw Material PP
water with pH 2-12.
: Wastewater that not contain solvents, ketones,
acetates System design for wastewater lines typically favors gravity water flow. To
avoid the build-up of high pressure and vacuum points in pipelines, pipes
: SBR gaskets (SBR: styrene-butadiene rubber) and fittings should be calibrated in such a way that inner volume should not
be filled completely.

www.vesbo.com