Page 2 - INCOLA EXCLUSIVE DATA SHEET

the installation wall. It is advisable to use a single VESBO Acoustic Clamp
VESBO INCOLA Exclusive pipes have very low thermal expansion System for each floor for sound safety.
coefficient. However, to ensure pipeline safety, the difference between the
maximum temperature of the wastewater and the minimum temperature of A fastening clamp should be placed right under the connection point
the pipes to be installed should be taken into consideration when surrounding a pipe, and it should be locked and fixed to the pipe in a vertical
connecting pipes and fittings. In addition, extra measures should be taken installation. A support clamp should be placed right under the fastening
to avoid external forces on connection points. During installation, it is clamp.
advisable not to insert connection points into one another completely, but
to leave a 10mm allowance for pipes to expand under heat. For pipe weights to be carried easily and to avoid slipping at the connection
points, pipe Support clamps should be used at intervals of 2m for system
safety.
Installation
Clamp intervals recommended for vertical and horizontal installations of
Connection of pipe and fittings VESBO INCOLA Exclusive pipes are listed in the table below.

VESBO INCOLA Exclusive pipes and fittings have belled ends equipped Pipe External Vertical Lines Max. Horizontal Lines Max.
with elastomeric gaskets. Applying lubricants on the gaskets will ease the Diameter (mm) Support Clamp Interval Support Clamp Interval
jointing. Push-fit system provides easy installations even in difficult spaces. OD (mm) 10 x Pipe External
Diameter (mm)
It is strictly not advisable to remove the gaskets during jointing. 50 2000 500
75 2000 750
Dry, unclean or cracked gaskets should not be used in an installation and 110 2000 1100
125 2000 1250
should be replaced with new ones. 160 2000 1600

It is important to ensure that the ends of pipes and fittings are entirely safe For connections between floors, short (500mm) VESBO INCOLA Exclusive
and clean from dirt and oil before an installation. pipes should be used. In addition, it is recommended to wrap the pipes
inside concrete with a noise absorbing, foam-like insulation material.
VESBO pipes and fittings are designed to perform best as an integral
system and should not be mixed with pipes and fittings of other brands in Connections Between Vertical and Horizontal Lines
an installation.
The amount of sound generated mostly depends on the length of the pipe.
Cutting the Pipes For connections between vertical and horizontal lines, it is recommended
to use two VESBO INCOLA Exclusive 45° Elbows instead of a single 87°
VESBO INCOLA Exclusive pipes may be cut by using a rotary pipe cutter
or a sharp saw that has a thin cutter head. Cracks or breaks on the cut Elbow. A 25cm long VESBO INCOLA Exclusive pipe should be placed in
piece must be carefully checked. Avoid pressing on the pipe while cutting between the two 45° Elbows.
to prevent it from getting deformed.
Installation at Horizontal Lines
VESBO INCOLA Exclusive pipes should be cut at a 90° angle to the pipe
axis. After cutting, burrs on the edges should be cleaned off. For ease of It is not necessary to use the double clamping system on horizontal lines.
installation and to avoid slipping of the gasket, chamfering to pipe edges To fix pipes to the walls, it is recommended to use only pipe support clamps
(approximately15°) is recommended. right after the belled-end parts next to the joints with intervals of 10xOD (10
times the external diameter of the pipe).

Installation in Vertical Lines Installation of Pipes Inside Concrete

The right clamps play a crucial role in sound proofing. In vertical lines it is Lines in kitchens and bathrooms can be concealed in concrete. We
recommended to use specially designed and patented VESBO Acoustic recommend to wrap the lines with insulating materials in order to avoid their
Clamp System together with VESBO INCOLA Exclusive pipes and fittings direct contact to concrete.
for the best sound insulation results. VESBO Acoustic Clamp System
consists of a double clamping system comprising a fastening clamp and a Make sure that the lines are properly aligned and the joints will not be
support clamp. Specially designed air channeled rubber gasket on the disrupted while plastering.
fastening clamp prevents the sound from reaching the wall because of its
vibration absorbing layer by using the support clamps, pipes are fixed onto Keep the installation area clean, do not leave any sharp objects that may
damage the pipes and fittings.

www.vesbo.com