Page 1 - VESBO INCOLA TRIO DATA SHEET

Product Specification of VESBO INCOLA Trio Sound Level : Result of the test reports (P-BA 274/2015e) made by
Fraunhofer Institute for Building Physics IBP on 24th
PP Multilayer Soundproof Piping System – Soil and November,2015
Waste Discharge Structure-borne sound level: 19 Lsc, A [dB(A)] at 4 l/s
(Accordance with EN 14366)
Definition
Connection : with spigot ends and elastomeric rings
Water flow in drainage pipes can generate disturbing noises. In the past,
noise prevention or reduction was achieved mainly by insulating pipes or Non-combustibility : E (EN 13501+A1), B2 (DIN 4102)

walls. This invariably incurred additional costs due to materials and labor
for installation, and precious time. Fire Growth Rate : Average FIGRA value (W/S): 1972.4

VESBO, a global brand name and innovator of smart piping solutions,
presents INCOLA Trio – a commercially and technically viable solution for Compatibility : Suitable for all waste water systems. No need the
home owners and installers. passage parts.

Standard : EN 1451-1, DIN 4102, EN 13501-1+A1, DIN 4102
Material : PP Compound consisting of:

External Audits : ISO 9001, ISO 45001, ISO 14001
 Pipes
- Inner and outer layers: Polypropylene (PP)
- Middle layer: “Incolene”- Polypropylene (PP) Registrations : CSTB-FRANCE, Fraunhofer-GERMANY, TSE-
reinforced with minerals TURKEY (In alphabetical order by country names)
 Fittings
- Injection-molded from Polypropylene (PP) Installation, Tests : National or local requirements and codes of practice
apply for installation of pipes and fittings. In addition,
incorporating “Incolene”- Polypropylene the manufacturer may provide recommended
(PP) reinforced with minerals installation guidelines

Density at 23°C : 1.1 g/cm³ (pipes), 1.0 g/cm³ (fittings) Pipe Dimension
DN /OD (mm) Thickness (mm)
Measuring Range : DN50, DN75, DN110, DN125, DN160, DN200 50 2.0
75 2.3
Melt Flow Rate : Max.: 3 g/10 min. (SUITABLE) 110 3.4
125 3.9
Pipe Type : Three layered pipe 160 5.3
200 6.2
 Inner layer: Abrasion resistant PP
 Middle layer: Sound absorbing Incolene material
 Outer layer: Impact resistant PP System Design

Application Area : Indoor and outdoor (SN4 ~ SN8) Since the connecting ends of the pipes and fittings are resistant to a
maximum of 0.5 bar of internal hydrostatic pressure, they are used in lines
Usage Area : It can be used in sewage installations except for all
oily waste pipes and pressurized waste water pipes with no pressure. It takes up to 80°C in continuous usage and up to 95°C
in short usage. It should not be used to carry wastes that contain petroleum
Usage Area : It is an ideal system for water with pH 2-12 based solvents, ketones and acetates. It is an ideal system to transport
water with pH 2-12.
: Temperatures of up 95°C (long-term) and 110°C
(short-term) System design for wastewater lines typically favors gravity water flow. To
avoid the build-up of high pressure and vacuum points in pipelines, pipes
Chem.Resistance : Raw Material PP
and fittings should be calibrated in such a way that inner volume should not
: Wastewater that not contain solvents, ketones, be filled completely.
acetates
VESBO INCOLA Trio pipes have very low thermal expansion coefficient.
: SBR gaskets (SBR: styrene-butadiene rubber) However, to ensure pipeline safety, the difference between the maximum
temperature of the wastewater and the minimum temperature of the pipes

www.vesbo.com