Page 2 - VESBO PE-X PRODUCT DATA SHEET

 When heating the pipe, the pipe should be fixed to rotating points
and 10 cm gap should be left with clamps to prevent the bent part
from flattening.
 Underfloor heating pipeline should be closed with concrete or
other coating after hydraulic tests are done. Coating height
should not be less than 3 cm.
 Fixed supporting connections on the pipeline should be properly
installed.
 The pipe should be protected from direct sunlight.

Usage and Technical Maintenance Rules
PEX pipes should not be used in the following situations:
 at operating temperature of the liquid carried above -
130 ° C,
 at operating pressure of 10 bar,
 in thermal radiation source areas whose surface
temperature exceeds 150 ° C;
 in safety (security), transmission and signaling piping
systems

www.vesbo.com