Page 54 - INCOLA EXCLUSIVE DATA CATALOGUE

Technical Data

7.2 Technical Data for VESBO INCOLA Trio

Raw Material PP-INCOLENE-PP with mineral additive (pipes and fittings) Associated Standards
Measuring Range DN 50 - DN 200

Melt Flow Rate (MFR)
For raw material ; 0.50 g/10 min. - 1.50 g/10 min. EN ISO 1133-1
230°C / 2.16 kg
Pipes : 1.1 g/cmᵌ
Density
Fittings : 1.0 g/cmᵌ
Three-layered pipe
- Inner layer : Impact and abrasion resistant PP
Pipe Type
- Middle layer : Sound absorbing Incolene material.
- Outer layer : Impact and abrasion resistant PP
Application Area Indoor and outdoor
It can be used in sewage installations except for all oily waste pipes and
Usage Area
pressurized waste water pipes.
It is an ideal system for water with pH 2-12
Usage Area
Temperatures of up 95°C (long-term) and 110°C (short-term)
Raw material PP
Chemical Resistance Wastewater that not contain petroleum based solvents, ketones, acetates ISO 10358
SBR gaskets (SBR: styrene-butadiene rubber)
Leaktightness 0,5 bar (5 m water column) EN 1277
Result of the test reports (P-BA 274/2015e) made by Fraunhofer Institute
for Building Physics IBP on 24th August,2015.
Sound Transmission
Structure-borne sound level : 14 Lsc,A [dB(A)] at 4 I/s EN 14366
UG rear sound level : 15 Lin [dB] at 4 l/s DIN 4109
Ring Stiffness ≥ 4 kN/m²

Connection With factory-installed lip seal sockets
Non-combustibility E EN 13501
Level B2 DIN 4102

Fire Growth Rate Average FIGRA value (W/S): 1972.4

Suitable for all waste water systems.
Compatibility
No need the passage parts.

Standards EN 1451-PP, DIN 4102, EN 13501-1, DIN 4102

External Audit ISO 9001, ISO 45001, ISO 14001, TSE

52