Page 1 - VESBO INCOLA INFERNO PRODUCT DATA SHEET

Product Specification of VESBO INCOLA Inferno Sound Level : Result of the test reports (P-BA 139/2018e) made by
Fraunhofer Institute for Building Physics IBP on 25th
PP Multilayer Soundproof Piping System – Soil and April,2018
Waste Discharge Structure-borne sound level: 16 Lsc, A [dB(A)] at 4 l/s
(Accordance with EN 14366)
Definition
Connection : with spigot ends and elastomeric rings
Water flow in drainage pipes can generate disturbing noises. In the past,
noise prevention or reduction was achieved mainly by insulating pipes or Non-combustibility : BS2d0 (EN 13501+A1), B1 (DIN 4102)

walls. This invariably incurred additional costs due to materials and labor
for installation, and precious time. Fire Growth Rate : Average FIGRA value (W/S): 200.38

VESBO, a global brand name and innovator of smart piping solutions,
presents INCOLA Inferno – a commercially and technically viable solution Compatibility : Suitable for all waste water systems. No need the
for home owners and installers. passage parts.

Material : PP Compound consisting of:
Standard : EN 1451-1, DIN 4102, EN 13501-1+A1, DIN 4102
 Pipes
- Inner and outer layers: Polypropylene (PP) Registrations : Fraunhofer-GERMANY, TSE-TURKEY
- Middle layer: “Incolene”- Polypropylene (PP)
reinforced with minerals * In Alphabetical Order by Country Names
 Fittings
- Injection-molded from Polypropylene (PP) Installation, Tests : National or local requirements and codes of practice
apply for installation of pipes and fittings. In addition,
incorporating “Incolene”- Polypropylene the manufacturer may provide recommended
(PP) reinforced with minerals installation guidelines

Density at 23°C : 1.25 g/cm³ (pipes), 1.29 g/cm³ (fittings) Pipe Dimension :
DN /OD (mm) Thickness (mm)
Measuring Range : DN50, DN75, DN110, DN125, DN160, DN200 50 4.0
75 4.5
Melt Flow Rate : Max.: 3 g/10 min. (SUITABLE) 110 5.3
125 5.3
Pipe Type : Three layered pipe 160 5.3
6.2
200
 Inner layer: Abrasion resistant PP
 Middle layer: Sound absorbing Incolene material
 Outer layer: Impact resistant PP
System Design
Application Area : Indoor and outdoor (SN4 ~ SN12)
Since the connecting ends of the pipes and fittings are resistant to a
Usage Area : It can be used in sewage installations except for all maximum of 0.5 bar of internal hydrostatic pressure, they are used in lines
oily waste pipes and pressurized waste water pipes
with no pressure. It takes up to 80°C in continuous usage and up to 95°C
Usage Area : It is an ideal system for water with pH 2-12 in short usage. It should not be used to carry wastes that contain petroleum
based solvents, ketones and acetates. It is an ideal system to transport
: Temperatures of up 95°C (long-term) and 110°C water with pH 2-12.
(short-term)
System design for wastewater lines typically favors gravity water flow. To
Chem.Resistance : Raw Material PP
avoid the build-up of high pressure and vacuum points in pipelines, pipes
: Wastewater that not contain solvents, ketones, and fittings should be calibrated in such a way that inner volume should not
acetates be filled completely.

: SBR gaskets (SBR: styrene-butadiene rubber) VESBO INCOLA Inferno pipes have very low thermal expansion coefficient.
However, to ensure pipeline safety, the difference between the maximum
temperature of the wastewater and the minimum temperature of the pipes

www.vesbo.com