Page 34 - INCOLA EXCLUSIVE DATA CATALOGUE

System Performance

4.3 System Performances of INCOLA Soundproof Piping Systems

EN 1451-1 standard meets the performance tests of non pressure PP pipe and fittings that are
used for the discharge of hot and cold unpressurized waste water inside or outside the building.

4.3.1 System Performance Applicable to INCOLA Exclusive According to
EN 1451-1

Test Standardt Condition Result Suitability
Pipe with Socket
For raw material;
Melt Flow Rate EN ISO 1133-1 Max.: 3g/10 min. 0.30 g/10 min. - SUITABLE
(230°C / 2.16 kg)
0.39 g/10 min.
Impact Resistance EN ISO 3127 should have no damage no cracking observed in SUITABLE
(24 h/0 °C) Tolerance : %10 any of the 10 testers
Longitudinal Reversion
(150 ° /60 min.) EN ISO 2505 Max.: %2 ≤ %0.85 SUITABLE

Ring Stiffness EN ISO 9969 Min.: 4 kN/m² ≥ 4 kN/m² SUITABLE
Resistance to the
Internal Pressure Test EN ISO 1167-1 -
( 95°C - 2.5 MPa - 100h) EN ISO 1167-2 should have no damage SUITABLE
( 80°C - 4.2 MPa - 140h)
Water Tightness EN ISO 13254 should be impermeable - SUITABLE

Air Tightness EN ISO 13255 should be impermeable - SUITABLE
should be impermeable
High Temperature EN ISO 13257 Deviation <0.05dn or 3 mm - SUITABLE
Cycling Test
(whichever is smaller)
Tightness of
elastromeric EN 1277 Condition B: with - SUITABLE
deformation of the pipe
ring seal joints-BD
DIN 4102 B1
Non-combustibility Level - SUITABLE
EN 13501-1 - DS3d2
Sound Transmission
Level DIN 4109 ≤ 30 dB(A) 12dB(A) SUITABLE
Material Polypropylene with mineral
additive

32